[5.4 speedster]

Gotta do a head gasket on my rear cylinder on the rc. Do I need to change anything out except for the head gasket? I have done head gaskets on cars before but some of them had head bolts that could only be used once. Thanks in advance!

 

[RVTMAVERICK]

Wella... a Head Gasket..... DUH!

:wtf























:woot: Joking... I'd say:

#1 Would be a "HONDA Service man."

FYI and or FWIW, As long as YOU are careful, upon Disa., storage and reassy., ... You CAN reuse the Valve cover seal(s)

Sorry, don't know about your Head Bolt question... I'll look it up when I get Home and see what the Service Bible says. IF someone else doesn't reply before then....?

Peace Jeff

 

[RVTMAVERICK]

WHOLEY CRAP "speedster":banghead

#1) 48 views and NO Help = DAMN!

#2) Sorry I forgot to reply to this for you... However, since YOU never replied to Me... it was easier for me to forget.

Anyhow, Here's Your info. about the "Head Bolts"
New Head Bolts get Torqued to 64 N-m (6.5 kgf-m, 47lbs)
Used Head Bolts get Torqued to 70 N-m (7.1 kgf-m, 51lbs)

Okay, I hope this Helps and Sorry you haven't had any other Help with this here... VERY Unusual BUT at the same token... IF You had a HONDA Service Manual... and (YOU Should). You wouldn't be asking these questions now would you..

Peace Jeff