Speedzilla Forums banner

WANTED: Muffler hangers/ clamps...

887 Views 8 Replies 0 Participants Last post by  Guest
G
Anybody have any muffler hangers/ clamps for a 748/916/996 lying around they can sell me?

Looks like this:


Please shoot me an e-mail off-list. Thanks...
See less See more
1 - 9 of 9 Posts
G
Re: WANTED: Muffler hangers/ clamps... (moomba)

saw your post on club-desmo. figured i'd post the same reply here FYI:

don't have any spares kicking around but you should specify which cans you want these fore. 748/916 cans are actually physically smaller than the 996/998 cans so the hangers are not interchangable. easy way to tell which are which is the 748/916 cans have oval opennings in the exhaust tips while the 996/998 cans have round (larger) opennings.
G
Re: WANTED: Muffler hangers/ clamps... (s4strati)

Thanks for the reply. I guess I need the ones from the 748/916.
G
Re: WANTED: Muffler hangers/ clamps... (moomba)

Moomba,
Do you know what diameter you need them for? When I ordered my Sil exhaust for the ss, the first set of straps they sent me were too small. So there's a chance they may be the right size for you. I'll gladly shoot them off if I can find them and they're the right size...I just don't have the rubber bits that go on the inside.
G
Re: WANTED: Muffler hangers/ clamps... (moomba)

If you are looking for the stock exhaust size, I may be able to help you. Let me see if I can find the stock pipes from the 996.
G
Re: WANTED: Muffler hangers/ clamps... (Kennedy)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Kennedy »</TD></TR><TR><TD CLASS="quote">Moomba,
Do you know what diameter you need them for? When I ordered my Sil exhaust for the ss, the first set of straps they sent me were too small. So there's a chance they may be the right size for you. I'll gladly shoot them off if I can find them and they're the right size...I just don't have the rubber bits that go on the inside.</TD></TR></TABLE>

They would be for the stock exhaust cans for the 748/916. Anyone know the diameter of it?

Thanks...
G
Re: WANTED: Muffler hangers/ clamps... (996pilot)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 996pilot »</TD></TR><TR><TD CLASS="quote">If you are looking for the stock exhaust size, I may be able to help you. Let me see if I can find the stock pipes from the 996. </TD></TR></TABLE>

Thanks, mate...I appreciate it.
G
Re: WANTED: Muffler hangers/ clamps... (moomba)

I have them, stock from a 2000 996. You can e-mail me off list at [email protected]
G
Re: WANTED: Muffler hangers/ clamps... (duc1036)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by duc1036 »</TD></TR><TR><TD CLASS="quote">I have them, stock from a 2000 996. You can e-mail me off list at [email protected]</TD></TR></TABLE>

Actually, according to s4strati above, I can't use the hangers from the 996.
1 - 9 of 9 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top