Speedzilla Forums banner

1 - 12 of 12 Posts

·
Registered
Joined
·
156 Posts
Discussion Starter #1
Hi there
does anyone have any power commander usb maps (Dan Kyle if possible) for my UK spec Honda SP1
I have removed the flapper valve and pairs system in full, and have a thorsten air box fitted also a full Akapovic titainium race system fitted.I use 97 octane fuel all the time and the bike is used mainly on the track
Not many SP1/RC51 tuners over here in the UK and Dan kyle parts and maps seem to be the best available (So sp2 pilot says):rockon

Thanks

JONTY
 

·
Enormous Member
Joined
·
1,460 Posts
ajonty said:
Hi there
does anyone have any power commander usb maps (Dan Kyle if possible) for my UK spec Honda SP1
I have removed the flapper valve and pairs system in full, and have a thorsten air box fitted also a full Akapovic titainium race system fitted.I use 97 octane fuel all the time and the bike is used mainly on the track
Not many SP1/RC51 tuners over here in the UK and Dan kyle parts and maps seem to be the best available (So sp2 pilot says):rockon

Thanks

JONTY
I am afraid the Euro ECU will not be compatable with the North American Maps I have.


I do like your bike. Kinda reminds me of mine;)
 

·
Registered
Joined
·
56 Posts
North American maps versus Euro maps

Hi,

I haven't myself been able to figure out the exact difference between North American ECUs and Euro ECUs. I took a closer look into both type of maps a while ago and it seems that there is no generic difference between them. At least my bike (Euro SP1/-01) seems to accept both types of maps without trouble. Actually, at the moment I am using a map derived from a Yoshimura EMS map. Seems that the EMS systems uses Powercommander compatible technology ? Is there someone who can verify this ?

More story about these issues in my web-site, scroll down to September 2005 and August 2005 sections.

The North America ECUs have a soft rev limiter, but in most of the maps there is no significant fuel trimming done above 8500 rpm or so. The important trims seem to be in the lower rpm regions.

br, JuhaV
 

·
Registered
Joined
·
56 Posts
PC Accelerator Pump settings

EvilTwin-05 said:
for the accelerator mod try 90% sensetivity and 15% extra fuel every 12 RPM.
Okay, for the PowerCommander Accelerator Pump software. Thanks, I will give it a try.

br, JuhaV
 

·
Registered
Joined
·
156 Posts
Discussion Starter #11
What no DK maps then for my SP1 ??????
l thought some dude would have something for a a UK bike that would not be in competion with there bikes in the USA
Come on guys give a limy a break pretty please
JONTY
 

·
Registered
Joined
·
1 Posts
Hello fellow riders. I have a US 2001 sp1. pair and flapper removed,power commander 3,sp2 intake with sp2 air box and a 2-1 jaradine full corbon exhaust. does anyone have the pc3 maps for sp1-sp2 intake mod? thank you.
 
1 - 12 of 12 Posts
Top