Speedzilla Forums banner

Passenger Peg Adapters for Sato high mount exhaust and others

1522 Views 1 Reply 2 Participants Last post by  Tinsnips
OEM passenger pegs relocation adaptors with SST hardware.
These are copied from my 20 year old brackets which are mounted on my SP2 with Sato Highmount. Others have made similar in the past so based on this they should work with Sato, Jardine, RP Tuning, etc. I refined a bit with lightening holes, centered c’bores, and a large thinning chamfer to reduce the chuckiness when looking from rear.
Milled from Alum 6061-T6. Choose black anodize or bare aluminum.
$225 shipped within US, more shipped elsewhere. Email [email protected] your interest. Would like 10 orders to start first batch.
As old reference
Green Product Font Auto part Machine
Green Product Font Auto part Machine
Green Product Font Auto part Machine
See less See more
1 - 2 of 2 Posts
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.