Speedzilla Forums banner

1 - 4 of 4 Posts
G

·
Guest
Joined
·
0 Posts
Discussion Starter #1
Anyone help me out with this one? I need the centre to centre dimension of the oil cooler take off points on the crankcase, needs to be spot on accurate. Also, what thread are they?

It's for a 748R but I guess it'll be the same across the whole 748/916/996 range.

Thanks guys, Neil
 
G

·
Guest
Joined
·
0 Posts
Discussion Starter #2
Re: Oil cooler take offs on crankcase, dimensions needed please! (748rheid)

Not sure about the center dimensions but the fitting are: at engine 14mm x 1.5; at cooler: AN-06.
 
G

·
Guest
Joined
·
0 Posts
Discussion Starter #3
Re: Oil cooler take offs on crankcase, dimensions needed please! (Nick D.)

Thanks Nick,

Not familiar with AN-06, is that the same as 9/16 UNF?

Thanks, Neil.
 
G

·
Guest
Joined
·
0 Posts
Discussion Starter #4
Re: Oil cooler take offs on crankcase, dimensions needed please! (748rheid)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 748rheid »</TD></TR><TR><TD CLASS="quote">Not familiar with AN-06, is that the same as 9/16 UNF?</TD></TR></TABLE>

Dunno... I have been able to source parts using the AN sizing, never tried converting it to something fractional. Sorry.
 
1 - 4 of 4 Posts
Top