Speedzilla Forums banner
21 - 24 of 24 Posts
I have had passenger pegs on my bike with Banzais, here is some info for those of you thinking about these peg adapters:

First off, I didn't have these plates, I just used 1 original mount hole and a piece of aluminum scrap to angle the peg forward (yes you have to switch the pegs left and right). A half ass solution but it worked for me.

Now if you want to do it correctly and make it look nice, I'd order these plates. I only put rear pegs on because my girlfriend really, really, really, really, really wanted to go for a ride. She ended up loving being on the back of the RC, which sucks because it is horrible for 2up riding.

Yes the pass. pegs got in the way of my feet just a LITTLE bit (i wear sz. 45 A* SMX +) when you have proper foot position on the pegs, but for normal 2 up riding it shouldn't be a problem at all, unless you have huge feet. At least it wasn't a big problem for me.

So all in all, if you want passenger pegs with highmounts, you don't have many options. No the solution isn't perfect, but you are starting with a shitty 2 up bike to begin with and adding high mount pipes which makes a terrible situation twice as bad. So its a wonder you can even fit pegs on there at all.

Myself regarding girlfriend on the back: at takeoff- :) 10min later- :( 30min. later-:banghead

GF's thoughts about riding on the back of the RC- :clapper :rockon :D
 
All NEW Passenger Peg Relocation Brackets for use with Sato Racing exhaust!

Hey all, after getting a number of requests for these over the years I had a batch of these made up.

These are exquisitely machined from billet aluminum right here in America and come with all new mounting hardware. They are anodized black and blend in very well with the bike. You can quickly add or remove the bracket if you want to carry a passenger.

Modification of the stock Honda passenger peg is not necessary. These are designed to work with the Sato Racing Banzai ultra high mount, but may also work with other high mount exhausts. All hardware for mounting included!

These were previously sold for $259, or maybe as much as $300 when available.

NEW SETS $159 Shipping only $5 US, $14 worldwide!!!!

Please PM me or email! These are ready to ship NOW!







Are these still available?
 
All NEW Passenger Peg Relocation Brackets for use with Sato Racing exhaust!

Hey all, after getting a number of requests for these over the years I had a batch of these made up.

These are exquisitely machined from billet aluminum right here in America and come with all new mounting hardware. They are anodized black and blend in very well with the bike. You can quickly add or remove the bracket if you want to carry a passenger.

Modification of the stock Honda passenger peg is not necessary. These are designed to work with the Sato Racing Banzai ultra high mount, but may also work with other high mount exhausts. All hardware for mounting included!

These were previously sold for $259, or maybe as much as $300 when available.

NEW SETS $159 Shipping only $5 US, $14 worldwide!!!!

Please PM me or email! These are ready to ship NOW!







Still available to purchase?
 
21 - 24 of 24 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top