Speedzilla Forums banner

1 - 3 of 3 Posts
G

·
Guest
Joined
·
0 Posts
Discussion Starter #1
Hey guys,

I have a 2001 748 that I'm trying to intall a taillight intergrator on. Hooked everything up just as the instructions said to. And I get running lights, not problem. Brakes lights, no problem. But, when I try the turn signals, both of the lights blink at the same time.
I've gone through everything that I know, and still can't seem to figure it out. I know I'm missing the easiest thing. Can anyone help me out?

Thanks,
Nick
 
G

·
Guest
Joined
·
0 Posts
Discussion Starter #2
Re: Need some help installing taillight intergrator (n737nc)

On the stock lights there is a piece of metal that is part of the socket for the bulbs.
If you look where they are bent at a 90 degree angle and put into a hole in the plastic bu the bulb so it doesnt rotate, it touches the other side of the other bulb also.
I think this might be the problem and if so you just need to cut the metal so it doesnt touch the other side.
I had to do this on my conversion kit i got from http://www.casolimotousa.com/
Hope this helps.
 
G

·
Guest
Joined
·
0 Posts
Discussion Starter #3
Re: Need some help installing taillight intergrator (998)

+1
 
1 - 3 of 3 Posts
Top