Speedzilla Forums banner

1 - 17 of 17 Posts
G

·
Guest
Joined
·
0 Posts
Discussion Starter #1
Will a 6.0 wheel fit on a 99 996 or only the stock size 5.5.
 
G

·
Guest
Joined
·
0 Posts
Discussion Starter #2
Re: Marchesini wheels (ahtune69)

6" wheel will fit on all 916 series bike.
 
G

·
Guest
Joined
·
0 Posts
Discussion Starter #3
The 6.0 is half inch wider it won't rub against the swing-arm or chain gaurd?
 
G

·
Guest
Joined
·
0 Posts
Discussion Starter #4
Re: (ahtune69)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ahtune69 »</TD></TR><TR><TD CLASS="quote">The 6.0 is half inch wider it won't rub against the swing-arm or chain gaurd?</TD></TR></TABLE>

Not even close.

Keep in mind it's only 1/4" wider on one side
 
G

·
Guest
Joined
·
0 Posts
Discussion Starter #5
Technically speaking it's 1/4" wide on each side, not just one. :)
 
G

·
Guest
Joined
·
0 Posts
Discussion Starter #6
Re: (Stick in Va)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Stick in Va »</TD></TR><TR><TD CLASS="quote">Technically speaking it's 1/4" wide on each side, not just one. :)</TD></TR></TABLE>

I think that's what he meant.
 
G

·
Guest
Joined
·
0 Posts
Discussion Starter #7
Re: (ahtune69)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ahtune69 »</TD></TR><TR><TD CLASS="quote">The 6.0 is half inch wider it won't rub against the swing-arm or chain gaurd?</TD></TR></TABLE>

The wheel doesn't rub anything, but I did carve out a little section on the chain guard though or the tire edge is too close IMHO. I only took out about the same 1/4 inch.
 
G

·
Guest
Joined
·
0 Posts
Discussion Starter #8
Re: (Phil 998)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Phil 998 »</TD></TR><TR><TD CLASS="quote">

only took out about the same 1/4 inch.</TD></TR></TABLE>

On each side or just one ?
 
G

·
Guest
Joined
·
0 Posts
Discussion Starter #9
Re: (Monstaman)

I think what you are forgetting all the sides. Ther is a :

Inside
Outside
Upside
Downside
Left side
Right side
Front side
Back side

If these were 1/4" a peice it would efinitly hit the swingarm
 
G

·
Guest
Joined
·
0 Posts
Discussion Starter #10
Re: (Phil 998)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Phil 998 »</TD></TR><TR><TD CLASS="quote">
but I did carve out a little section </TD></TR></TABLE>

I hope this wasn't a part of section 8
 
G

·
Guest
Joined
·
0 Posts
Discussion Starter #11
Re: (Monstaman)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Monstaman »</TD></TR><TR><TD CLASS="quote">

On each side or just one ?
</TD></TR></TABLE>

Both Andi, mine is so wicked it has a chain drive on both sides.
 
G

·
Guest
Joined
·
0 Posts
Discussion Starter #12
Re: (section8superbike)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by section8superbike »</TD></TR><TR><TD CLASS="quote">I think what you are forgetting all the sides. Ther is a :

Inside
Outside
Upside
Downside
Left side
Right side
Front side
Back side
</TD></TR></TABLE>

Jason

You missed a couple. What about the High Side or the Dark Side?
 
G

·
Guest
Joined
·
0 Posts
Discussion Starter #13
Re: (trussdude)

Ironside
stepside
broadside

I love it when threads do this.
 
G

·
Guest
Joined
·
0 Posts
Discussion Starter #14
Re: (Mental998)

In your best gangsta biotch voice

say snoops up.....side your head.....say........ snoops upside your head...........say what..


 
G

·
Guest
Joined
·
0 Posts
Discussion Starter #15
Re: Marchesini wheels (ahtune69)

Heya ahtune69, sorry for the thread jack on behalf of these guys and myself, a good sensible question you asked and a good answer too!

A good we piss pulling sesh is always good fun, I hope you get to enjoy more of it and welcome to the board.

Now where were we

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Phil 998 »</TD></TR><TR><TD CLASS="quote">

Both Andi, mine is so wicked it has a chain drive on both sides. </TD></TR></TABLE>

Wow that is sooooo coul, you should be able to get twice as much traction now.

So if the tyre on one side carves a hole in the chainguard, which side is the hole in?, is the whole chaingaurd stuffed?, if the inside diameter is bigger than the outside diameter then the hole will be on the outside, so which side is the outside, oh man I am confused now.

So now we have a wholly part section 8 with a hole on the outside which is not visible from the inside because there isn't one.
 
G

·
Guest
Joined
·
0 Posts
Discussion Starter #16
Re: Marchesini wheels (Monstaman)

Thanks fellas I know what I'll do. I'll put the front wheel on the rear so I'll know damn well it won't rub.
 
G

·
Guest
Joined
·
0 Posts
Discussion Starter #17
Re: Marchesini wheels (ahtune69)

Ouwh thats just silly now, we all know that it won't work cos the axle nut is the wrong size
 
1 - 17 of 17 Posts
Top