G
Guest
·Okay, I need some help installing a Magnet Marelli digital dash MT 940/1 and a pressure sensor, any takers?
Modified by BlackHawk at 9:27 AM 7/6/2005
Modified by BlackHawk at 9:27 AM 7/6/2005
Magnet Marelli installation help
1 - 20 of 61 Posts
G
Guest
·Re: Magnet Marelli installation help (BlackHawk)
Does any1 know how to reset a Magnet Marelli dash, I think I have messed it up?
Does any1 know how to reset a Magnet Marelli dash, I think I have messed it up?
G
Guest
·Re: Magnet Marelli installation help (BlackHawk)
Here are some pictures of the dash and the sensors.
![]()
I had to fabricate a new fitting for the oil temp sensor so it can mount right on the oil deliver line to the engine heads, what do you guys think on that location?
![]()
![]()
Here you can see the water temp sensor.
![]()
And here you can see the speed sensor, not too sure on the location if it’s good, please let me know if you have better location in mind.
![]()
Here are some pictures of the dash and the sensors.
I had to fabricate a new fitting for the oil temp sensor so it can mount right on the oil deliver line to the engine heads, what do you guys think on that location?
Here you can see the water temp sensor.
And here you can see the speed sensor, not too sure on the location if it’s good, please let me know if you have better location in mind.
G
Guest
·Re: Magnet Marelli installation help (BlackHawk)
Okay now let me start by telling you what I did with the dash.
After installing all of the pickup sensors on the dash I thought I had to mess with the toggle switches on the back, so I did, and now the dash can’t flip through the different pages (race, warm-up, and practice).
Before starting the bike, (just turning the key for power), I get this screen:
![]()
After this start screen, (5 sec) I get this screen (practice),:
![]()
And this is the screen that stays on, while the engine is running:
I attempt to press the button in order to flip through the different screens, but the "practice" screen is all I get, and no rpm indicator.
![]()
Please if some one knows how to reset the unit to the factory settings and the factory toggle switch positions, I would really appreciate it.
Okay now let me start by telling you what I did with the dash.
After installing all of the pickup sensors on the dash I thought I had to mess with the toggle switches on the back, so I did, and now the dash can’t flip through the different pages (race, warm-up, and practice).
Before starting the bike, (just turning the key for power), I get this screen:
After this start screen, (5 sec) I get this screen (practice),:
And this is the screen that stays on, while the engine is running:
I attempt to press the button in order to flip through the different screens, but the "practice" screen is all I get, and no rpm indicator.
Please if some one knows how to reset the unit to the factory settings and the factory toggle switch positions, I would really appreciate it.
G
Guest
·Re: Magnet Marelli installation help (BlackHawk)
Also I did attempt to call Magneti Marelli Holding S.p.A. here in the US but all I get is an answering machine, does anyone know of a better place I should contact?
Also I did attempt to call Magneti Marelli Holding S.p.A. here in the US but all I get is an answering machine, does anyone know of a better place I should contact?
G
Guest
·Re: Magnet Marelli installation help (BlackHawk)
I was told by SuperBikes that there is a way to reset the unit by jumping some pins, does anyone know how to do this?
I was told by SuperBikes that there is a way to reset the unit by jumping some pins, does anyone know how to do this?
G
Guest
·Re: Magnet Marelli installation help (BlackHawk)
Will this help?
http://www.magnetimarelli.com/racing/racing.htm
Will this help?
http://www.magnetimarelli.com/racing/racing.htm
G
Guest
·Re: Magnet Marelli installation help (tricklidz1)
click on the motorcycle...
Or try: http://www.bcmducati.com/
click on the motorcycle...
Or try: http://www.bcmducati.com/
G
Guest
·Re: Magnet Marelli installation help (tricklidz1)
I have a different unit: MyChron3PLUS,,but this is how I mounted the speed sensor:
/http://images.snapfish.com/34438%3B5923232%7Ffp45%3Dot%3E2325%3D64%3A%3D827%3DXROQDF%3E23237%3A34%3B%3B264ot1lsi[IMG]
Still unable to get the "gear indicator" function to work!! [img]http://images.zeroforum.com/smile/emthdown.gif
I have a different unit: MyChron3PLUS,,but this is how I mounted the speed sensor:
/http://images.snapfish.com/34438%3B5923232%7Ffp45%3Dot%3E2325%3D64%3A%3D827%3DXROQDF%3E23237%3A34%3B%3B264ot1lsi[IMG]
Still unable to get the "gear indicator" function to work!! [img]http://images.zeroforum.com/smile/emthdown.gif
G
Guest
·Re: Magnet Marelli installation help (tricklidz1)
sorry, here's the pic:
![]()
sorry, here's the pic:
G
Guest
·Re: Magnet Marelli installation help (tricklidz1)
![]()
G
Guest
·Re: Magnet Marelli installation help (tricklidz1)
That looks really good (speed sensor). I did attempt to call BCM, but they where unable to help me out, they where still playing where there dash.
That looks really good (speed sensor). I did attempt to call BCM, but they where unable to help me out, they where still playing where there dash.
G
Guest
·Re: Magnet Marelli installation help (BlackHawk)
I take it, you didn't get instructions?????
![]()
I take it, you didn't get instructions?????
G
Guest
·Re: Magnet Marelli installation help (tricklidz1)
Well, I do have the usre manual, but no instructions on how to reprogram it.
Well, I do have the usre manual, but no instructions on how to reprogram it.
G
Guest
·Re: Magnet Marelli installation help (BlackHawk)
Dude... I spent more $$$ getting my MyChron 3 Gold installed & working than I did on the unit itself...
If I knew then what I know now.....
![]()
Dude... I spent more $$$ getting my MyChron 3 Gold installed & working than I did on the unit itself...
If I knew then what I know now.....
G
Guest
·Re: Magnet Marelli installation help (BlackHawk)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by BlackHawk »</TD></TR><TR><TD CLASS="quote">
![]()
</TD></TR></TABLE>
Ha, it has my name on it, give it back!
![]()
Looks like a cool piece of kit BlackHawk, hope you get it going right, I have the SPA dash and am about to start wiring that one.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by BlackHawk »</TD></TR><TR><TD CLASS="quote">
</TD></TR></TABLE>
Ha, it has my name on it, give it back!
Looks like a cool piece of kit BlackHawk, hope you get it going right, I have the SPA dash and am about to start wiring that one.
G
Guest
·Re: Magnet Marelli installation help (hank)
Sorry to hijack the thread, but where did you guys get the carbon fiber dash panel? I'm hoping to be able to use the OE sensors for the speed and oil temps for my Mychron3.
Sorry to hijack the thread, but where did you guys get the carbon fiber dash panel? I'm hoping to be able to use the OE sensors for the speed and oil temps for my Mychron3.
G
Guest
·Re: Magnet Marelli installation help (cakake)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Monstaman »</TD></TR><TR><TD CLASS="quote">
Ha, it has my name on it, give it back!
</TD></TR></TABLE>
![]()
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Monstaman »</TD></TR><TR><TD CLASS="quote">
Ha, it has my name on it, give it back!
</TD></TR></TABLE>
G
Guest
·Re: Magnet Marelli installation help (cakake)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by cakake »</TD></TR><TR><TD CLASS="quote">Sorry to hijack the thread, but where did you guys get the carbon fiber dash panel? I'm hoping to be able to use the OE sensors for the speed and oil temps for my Mychron3.
</TD></TR></TABLE>
Well, I made that one.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by cakake »</TD></TR><TR><TD CLASS="quote">Sorry to hijack the thread, but where did you guys get the carbon fiber dash panel? I'm hoping to be able to use the OE sensors for the speed and oil temps for my Mychron3.
</TD></TR></TABLE>
Well, I made that one.
G
Guest
·Re: Magnet Marelli installation help (hank)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by hank »</TD></TR><TR><TD CLASS="quote">Dude... I spent more $$$ getting my MyChron 3 Gold installed & working than I did on the unit itself...
If I knew then what I know now.....
![]()
</TD></TR></TABLE>
Yeah I know now!! This is getting to be too much $$$ for me.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by hank »</TD></TR><TR><TD CLASS="quote">Dude... I spent more $$$ getting my MyChron 3 Gold installed & working than I did on the unit itself...
If I knew then what I know now.....
Yeah I know now!! This is getting to be too much $$$ for me.
1 - 20 of 61 Posts
