Speedzilla Forums banner

LED question

1858 Views 7 Replies 0 Participants Last post by  Guest
G
I decided to put an LED in to illuminate my License plate. It looks great, but all they had was red, and the light output sucks big time. Anyone know of a good source for a BRIGHT white LED that is 12v ready? I tried Radio Shack, but no luck. Thanks in advance.
See less See more
1 - 8 of 8 Posts
G
Re: LED question (CaliDuc)

ebay. :)
G
Re: LED question (CaliDuc)

I used a white step light from Custom Dynamics. It has a bit of a blue tint, but does the job very nicely:

http://www.customdynamics.com/step_lights.htm
G
Re: LED question (CaliDuc)

you want raw LED's???

try this...

http://www.led-supply.com/leds.html

and these are supposed to be the brightest on the market, but you'll have to find a supplier...

http://www.lumileds.com/
G
Re: LED question (CaliDuc)

Fry's electronics if you have one close by
G
Re: LED question (04749s)

Try Here
Under Catagory scroll down to License Lights.
http://www.targa-acc.com/main_powersearch.html
G
6
Re: LED question (CaliDuc)

Well I went to a local store and bought a bright white LED and installed it. $2.50 later here is what I have.

Supplies: One LED, one resistor, & a LED holder.


Okay I didn't have any heat-shrink tubing, but it won't be seen. Soldered everything up and viola!


Final result. Doesn't look too shabby. Brighter than what I had. Me thinks it is bright enough not to get a ticket now.



Let me know whatcha think.
See less See more
G
I would recommend:

http://www.mouser.com or
http://www.digikey.com

They have a ton of Superbrite LEDs in various sizes, up to I think 10mm
1 - 8 of 8 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top