Speedzilla Forums banner

1 - 10 of 10 Posts
G

·
Guest
Joined
·
0 Posts
Discussion Starter #1
so I lov4 researching my loves....i knew my RC51 inside out in most ways....and i'm now still in chapter one of my new and still untitled 998-
I have only the pit bull rear left stand and not the reversible
is the only real front stand triple option the pit pull coversion arm set?

or a ladder and ratchet strap to the stearing head
 
G

·
Guest
Joined
·
0 Posts
Discussion Starter #3
Re: dorky new guy question (mh900e0974)

i don't see a visual for the lower triple cradle for the duc SBK's...it just shows pins...do they run the same type of lower triple (no hole) cradle as Pit Bull ?
 
G

·
Guest
Joined
·
0 Posts
Discussion Starter #4
Re: dorky new guy question (throttlehead)

The pin type do not work on a 998 since there is no hole in the bottom triple clamp.
 
G

·
Guest
Joined
·
0 Posts
Discussion Starter #5
Re: dorky new guy question (Phil 998)

what a dork



I think the two sided pit-bull stand is by far the best
 
G

·
Guest
Joined
·
0 Posts
Discussion Starter #6
Re: dorky new guy question (Phil 998)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Phil 998 »</TD></TR><TR><TD CLASS="quote">The pin type do not work on a 998 since there is no hole in the bottom triple clamp.</TD></TR></TABLE>

i know....that's why i'm asking if they have the same cradle as pit bull converter.


<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by brettmess24 »</TD></TR><TR><TD CLASS="quote">what a dork

I think the two sided pit-bull stand is by far the best </TD></TR></TABLE>

and you work on your forks how ?
 
G

·
Guest
Joined
·
0 Posts
Discussion Starter #7
Re: dorky new guy question (throttlehead)

pit bull has a kit for the ducati lower
 
G

·
Guest
Joined
·
0 Posts
Discussion Starter #8
Re: dorky new guy question (throttlehead)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by throttlehead »</TD></TR><TR><TD CLASS="quote">

i know....that's why i'm asking if they have the same cradle as pit bull converter.


and you work on your forks how ?
</TD></TR></TABLE>


take a look here
now whats up dorky new guy= your saying not mine





Modified by brettmess24 at 6:04 AM 7/2/2005
 
G

·
Guest
Joined
·
0 Posts
Discussion Starter #9
Re: dorky new guy question (brettmess24)

I have a folding automotive engine puller/hoist i use to elevate my bikes.Cheap and chinese at $200. from BJs,but it'll elevate any bike easily.
 
G

·
Guest
Joined
·
0 Posts
Discussion Starter #10
Re: dorky new guy question (ducxl)

sure hope to ride more than look at my Duc with no parts on it


Good luck guys - get that stuff bolted in and roll
 
1 - 10 of 10 Posts
Top