Bi-Xenon Projector HIDs on my RC! - Page 2 - Speedzilla Motorcycle Message Forums
Reply
 
LinkBack Thread Tools Display Modes
post #21 of 26 (permalink) Old 11-30-2011, 04:15 PM Thread Starter
Member
 
Join Date: Aug 2007
Location: Bay Area, CA
Posts: 45
OKay I hope these help...
1st pic: Here is the switch that controls on/off for the lights, it is mounted just on the inside of the left fairing behind where the turn signal mounts.

2nd pic: Here is the relay (mounted in between the left fairing and inside fairing trim piece this is also where i mounted the ballast for the left headlight bulb
Fat White wire goes to battery ground
Fat Red wire goes to battery positive
2 small red wires (switched 12v)power to headlights when on
Green wire is the aux switch.
Attached Images
  
Jman is offline  
Sponsored Links
Advertisement
 
post #22 of 26 (permalink) Old 11-30-2011, 04:20 PM Thread Starter
Member
 
Join Date: Aug 2007
Location: Bay Area, CA
Posts: 45
Next we have the pigtail I made which connects the 2 positive leads for the Bi-Xenon Solenoids (highbeams) and the 2 grounds into the OEM highbeam headlight plug.
Attached Images
 
Jman is offline  
post #23 of 26 (permalink) Old 11-30-2011, 04:22 PM Thread Starter
Member
 
Join Date: Aug 2007
Location: Bay Area, CA
Posts: 45
Here is the OEM lowbeam headlight plug which grounds the two HID ballasts (Green wires) and powers the aux switch (red wire)...
Attached Images
 
Jman is offline  
 
post #24 of 26 (permalink) Old 11-30-2011, 04:25 PM Thread Starter
Member
 
Join Date: Aug 2007
Location: Bay Area, CA
Posts: 45
Here are the connections to the battery terminals... I routed the wires along the main engine harness that runs under the tank. I wrapped both wires in plastic wire loom to protect from heat/abrasive edges/weather...
The positive has an in-line 30a fuse
Attached Images
 
Jman is offline  
post #25 of 26 (permalink) Old 11-30-2011, 04:31 PM Thread Starter
Member
 
Join Date: Aug 2007
Location: Bay Area, CA
Posts: 45
I didnt take a shot of the back of the AUX switch cause I couldn't get my phone in there...
In fact, I had to unwrap and clip some wire ties to get the wires loose enough to take pictures for you. Once they are routed up nice, the install is hard to notice except for the highbeam pigtail which is routed just under the dash...

Here is where I grounded the aux switch...
the Aux switch has 3 terminals:
1: ground
2: switched 12v
3: signal wire to relay

I hope this helps!
Attached Images
 
Jman is offline  
post #26 of 26 (permalink) Old 11-30-2011, 04:35 PM Thread Starter
Member
 
Join Date: Aug 2007
Location: Bay Area, CA
Posts: 45
it was quite foggy last night on the ride home from work, HIDs looked like laser beams in the mist, gave me a really cool "video game like" ride home... had to snap a picture to illustrate...
Attached Images
 
Jman is offline  
Sponsored Links
Advertisement
 
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Speedzilla Motorcycle Message Forums forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome