billet cams

[dalerc30]

I've been having problems logging on to the site,the administrators have been hard to contact and as a result I've had to change my user i.d.so sorry if you have tried sending me a pm.

I have 2 remaining sets of steel billet cams available, the same cams Damon Stewart is running in his 148hp engine.
Refer to:
Billet cams
for previous discussion.I can also supply these with a more race oriented intake cam featuring 12.4mm lift.

Price is US$1600 delivered per set,donor gears required.

email me dalewrc30@gmail.com

[OB6D]

Sent you mail a wee while back. I suppose my set should be at your place again by now.

I had a letter from customs when they arrived here in Holland. They wanted me to explain just what they were. There was also a checkbox [-] return to sender. I went for that option. After that, complete radio silence...

[whitw wings]

Originally Posted by OB6D

Sent you mail a wee while back. I suppose my set should be at your place again by now.

I had a letter from customs when they arrived here in Holland. They wanted me to explain just what they were. There was also a checkbox [-] return to sender. I went for that option. After that, complete radio silence...

Ya me too,

[dalerc30]

I have 2 sets left that I'd like to clear so am reducing the price to US$1500 a set including return delivery.

If you've been stting on the fence trying to decide whether to get a set or not,it may be quite a while before they get done again ,if ever.


Dale

[RockyMt]

Just forward payment to my friend in Nigeria, CASH, and I'll send 'em right out........

-Rocky-

[RockyMt]

Gee, it seem's like "someone" got butt hurt 'bout the humor posted above, and is now sending me threatening e-mails, saying he's "gonna get me "suspended" from Speedzilla if I don't delete the post"..........GET A LIFE PAL, AND WHILE YER AT IT GROW A THICKER LAYER OF SKIN! IT WAS A "JOKE" AND IF YA DON"T LIKE IT, TOO BAD!
If you are afraid of someone, anyone, ME, damaging your "business" by posting a joke about an online post, you have more to worry about than me. And in the future, know that ANYTHING you send "privately" to me will ALWAYS be posted for all to see. Now, about that check you were gonna send me, make it out to CASH!

Semper Fi,

-Rocky-

[dalerc30]

you have seriously questioned my integrity as I detected zero amount of "humour" in your post.I PMed you rather than turn this into some kind of public mud slinging match , however by the tone of your reply, I think its pretty obvious to all just what kind of person you are,thick skinned and arrogant.

Dale

[dstewart]

Just for the record,
Dale can be hard to get ahold of somtimes and shipping can take some time, but he has always been good to his word with me on several deals. I would not hesitate to buy anything from Dale in the future.

[mrgrn]

i have been wating almost three years for a axle from Dale

[RVTMAVERICK]

Originally Posted by dstewart

Just for the record,
Dale can be hard to get ahold of somtimes and shipping can take some time, but he has always been good to his word with me on several deals. I would not hesitate to buy anything from Dale in the future.

+1... However,Not with "several deals"..

But I've had NO problems getting ahold of Dale, He's always replied to questions and has been Great to deal with, the 1 time money and goods was exchanged! No Problems at all and wouldn't hestate for a second not to deal with him again!


However... Knowing "Rocky" and how he is here... I CAN'T Think, he wasn't just being a Complete Ass!... OPPS! I mean Jokester! hehehee

[RVTMAVERICK]

Originally Posted by mrgrn

i have been wating almost three years for a axle from Dale

So what's this about Mark... For Real!? He's held your money for an axle for 3yrs!?? I don't believe it Shocked to hear this

[dalerc30]

Originally Posted by mrgrn

i have been wating almost three years for a axle from Dale

Are you sure about that as I seem to remember sending it to you.

Dale

[RockyMt]

Gee, we could make this like a "town hall meeting....."
(sorry for jacking the thread, no harm, no foul. "Dealer" however need's to lighten the fook up...........)

-Rocky-

[mrgrn]

Originally Posted by dalerc30

Are you sure about that as I seem to remember sending it to you.

Dale

the custom one? LOL

i also tossed the parts you won on ebay i was holding until the custom end axle came from you your buddy was supposed to make but his machine broke or the cutter blades went or something

I gave up after like a year and i am 1000% sure about not getting NOR you telling me it was shipped , that was almost 3 years ago

[dalerc30]

Hi Mark,pm sent.

[RockyMt]

The plot thickens..................

-Rocky-

[mrgrn]

Originally Posted by RockyMt

The plot thickens..................

-Rocky-

there is no thickens, i tossed his crap in the garbage and wrote it off as WTF?

good luck with them cams though

[Jami6989]

Originally Posted by mrgrn

there is no thickens, i tossed his crap in the garbage and wrote it off as WTF?

Oddly enough, there's been quite a bit of carbon sold on here that has suffered the same fate.

[OB6D]

If it had not been for the assembly mistake, i'd have had them already (those cams) cuz, they've been here in Holland, at what's it called, customs. I though asked them to not send em to me but straight back where they came from.

[DeepCmonkey]

Originally Posted by dalerc30

I've been having problems logging on to the site,the administrators have been hard to contact and as a result I've had to change my user i.d.so sorry if you have tried sending me a pm.

I have 2 remaining sets of steel billet cams available, the same cams Damon Stewart is running in his 148hp engine.
Refer to:
Billet cams
for previous discussion.I can also supply these with a more race oriented intake cam featuring 12.4mm lift.

Price is US$1600 delivered per set,donor gears required.

email me dalewrc30@gmail.com

Just a quick question mate, these cams what type of spring do you recommend, and where could i get said springs?

Cheers,

Jason.