Billet cams - Page 4

whitw wings · #61 (**permalink**) 05-29-2009, 07:55 AM

I would love to see what kind of payment plan Jason has asked you to participate in...I have a felling it would look something like this..............

fastattack686 · #62 (**permalink**) 08-16-2009, 07:13 AM

All this is good info for the front end of the prep work... but I have yet to see what the end result is.

anyone have dyno info or HP/Torque info (what the end user is gonna GET for his 1200 or 1600 USD?)

thanks

Redstar · #63 (**permalink**) 08-16-2009, 12:07 PM

Look at DStewarts post on his engine and dyno work, you'll see pleanty of good numbers there. You should search as this forum has soooooo much wealth of knowledge on this bike you will be busy reading for a long time.

fastattack686 · #64 (**permalink**) 08-19-2009, 03:44 AM

Thanks. Will search. Only reason I asked was because he had mentioned early in this thread that he did not know about dyno numbers. Was just curious if they ever were ran with these Cams.

Will do some searchin...

5.4 speedster · #65 (**permalink**) 10-01-2011, 01:29 AM

any updates?

Jami6989 · #66 (**permalink**) 10-01-2011, 09:47 AM

I'm sure everything is on schedule.

shelbyhobby · #67 (**permalink**) 10-01-2011, 05:09 PM

Quote:

Originally Posted by 5.4 speedster

any updates?

Quote:

Originally Posted by Jami6989

I'm sure everything is on schedule.

nice jamie!

2 year late bump..

i like

Bruchi · #68 (**permalink**) 10-01-2011, 07:43 PM

I got my cams from Dale this year.
Since I have sent him my first mail, it took about 5 month to hold them in my hands.
The cams are good quality!

Intake and exhaust lift are 12,51mm
Duration 280 degrees.
10 degrees valve overlap.
Cam timing 102,5 and 112,5.

Setup is lightened oem valves
Ti. retainers
HRC springs and seats

5.4 speedster · #69 (**permalink**) 10-01-2011, 11:43 PM

have you ridden the bike with them? Are the cams you got the ones that are similar to the mori stage 2?

Bruchi · #70 (**permalink**) 10-02-2011, 08:17 AM

No,

I haven't ridden them since I got them.
The cams are at the workshop of my engine tuner.
I will get back my engine next week if everything goes right.

They aren't similar to Mori st2. These cams have a little more lift than the HRC cams.
They are copys of Erion race cams.

The curious thing is, both cams have the same lift...
My engine builder and I are very exited to see valve to piston clearence of the exhaust cam...
But he is optimistic, the HRC which he mounted years ago
had the same specs with a little less lift.
We will see...