My new Bike ... but no RC - Speedzilla Motorcycle Message Forums
Speedzilla Motorcycle Message Forums  

Go Back   Speedzilla Motorcycle Message Forums > Honda Sport Twins > Honda Sport Twins Image Gallery

Reply
 
LinkBack Thread Tools Display Modes
  #1 (permalink)  
Old 03-19-2010, 01:43 PM
Stephan-SP1-#679's Avatar
Senior Member
 
Join Date: Jan 2009
Location: Germany, Weserbergland
Posts: 175
Talking My new Bike ... but no RC

Hi,
my SP1 is gone ... but here is my new ride..

RSV Edwards ..... I built a trackbike, its a project for my Motorcycle Technican Master education here in germany ...it takes many houres of work..
Attached Images
 
__________________
if the line in your underpants is darker than on the road is something wrong

www.motorradmeisterei.de
Reply With Quote
Sponsored Links
Advertisement
 
  #2 (permalink)  
Old 03-19-2010, 01:48 PM
Stephan-SP1-#679's Avatar
Senior Member
 
Join Date: Jan 2009
Location: Germany, Weserbergland
Posts: 175
Default

rearview
__________________
if the line in your underpants is darker than on the road is something wrong

www.motorradmeisterei.de
Reply With Quote
  #3 (permalink)  
Old 03-20-2010, 01:16 AM
Zombies, I have a plan
 
Join Date: Nov 2005
Location: The State of Hockey
Posts: 59
Default

Looks like fun.
__________________
Life is too short not to be Italian
Reply With Quote
  #4 (permalink)  
Old 03-20-2010, 01:19 AM
bensexcessbikes's Avatar
Big Thymer
 
Join Date: Nov 2008
Location: New York
Posts: 1,831
Default

That's bad ass... nice work man!
__________________
info @ RC51Parts <dot> com
http://www.RC51Parts.com

Reply With Quote
  #5 (permalink)  
Old 03-20-2010, 09:13 PM
RC51Stunna's Avatar
Senior Member
 
Join Date: Apr 2003
Location: San Diego, CA
Posts: 4,418
Send a message via AIM to RC51Stunna
Default

Looks great!

Hopefully this NEVER happens to your Aprilia..


Is this the bike yours is a replica of?

"F1 tech in MotoGP: The Aprilia RS3 Cube

First seen at the Bologna Motor Show in Italy, in December 2001, the RS3 Cube marked Aprilia’s ambitious entry into the tempestuous world of MotoGP. Powered by a four-stroke 990cc three-cylinder engine fitted with pneumatic-valves, the 240-horsepower RS3 was supposed to be one of the most powerful MotoGP machines of its time.

Raced from 2002 to 2004, the Cube’s performance was less than exemplary. There were problems with the bike’s suspension, and its computer-controlled fly-by-wire throttle system was deemed unpredictable by riders Colin Edwards and Noriyuki Haga, with the latter crashing the RS3 Cube all of 28 times in a single season, in 2003! (Unless Haga-san was crashing the bike twice in almost every race, we suppose that figure includes crashes during practice and qualifying etc.)

So what went wrong? The RS3 Cube’s inline-three was designed by Aprilia in a technical collaboration with British engine specialists, Cosworth, who had earlier also worked with Aprilia on the RSV1000’s v-twin. ‘We chose a three-cylinder engine for several reasons. The first was that I was sure the Japanese wouldn't make a triple, and it was important for Aprilia to have something different from the others,’ said Aprilia racing team boss, Jan Witteveen, speaking to Motorcyclist magazine.

‘MotoGP rules favor three- and five-cylinder machines, and historically, the triple is more a European concept. A 990cc triple has a 330cc cylinder capacity, which is very close to the dimensions of a 10-cylinder 3.5-litre engine of an F1 car. This way, I could use a lot of technology and parts from Formula 1, which would save some development time,’ said Witteveen.


Noriyuki Haga and Colin Edwards found the RS3 Cube a right handful...

At one time, Aprilia even had plans of building a street-legal replica of their three-cylinder MotoGP machine, but when the RS3 Cube failed to do well in competition, all those plans went out of the window. A lot of the problems with the bike were down to its complex engine management and traction control systems – riders did not like the way these ‘interfered’ with their ‘normal’ way of riding.

Also, the Cube’s chassis and suspension combo did not work very well. The bike’s twin-spar aluminum frame, Ohlins shock, and 45mm Ohlins fork may have been top-spec components individually, but did not work with each other – the RS3 was prone to pulling wheelies, and there was often lack of adequate traction at the rear, a problem which was actually further compounded – rather than helped – by the Cube’s traction control system.

‘The RS3 pulls strongly from 8,000rpm and goes mental when you crack the throttle hard open anywhere above 10,000rpm grand, accelerating unbelievably fast. Your arms are yanked in their sockets and the Cube just takes off. Anywhere from 11,000rpm upward in the bottom four gears, the front wheel starts pawing the air as you shift seamlessly through the gears,’ said Alan Cathcart, when he tested the bike for Motorcyclist.

Cathcart actually liked the motorcycle, saying that ‘This is very far from being the unruly and remote-feeling rolling-laboratory-cum-two-wheeled-Formula 1 car I was expecting. Instead, it felt like a conventional race bike, but with genuine added value obtained from real-world applied electronics-with-a-purpose.’

However, Colin Edwards, who actually raced the bike in 2003, had a very different opinion of the RS3 Cube. ‘Too trick, possibly. Actually, I would not say too trick. I'm just not convinced that car technology works on motorcycles,’ he said, speaking to Superbike Planet.

Well, almost five years after Aprilia pulled the plug on their MotoGP effort, it’s perhaps too late to contemplate whether F1 tech could have worked in MotoGP, had Cosworth tried a bit harder. What matters is, Aprilia haven’t given up – they hope to be back in MotoGP by 2010 with an all-new bike. Now if only they can get Stoner to ride for them… :-)

Faster and Faster: F1 tech in MotoGP: The Aprilia RS3 Cube
__________________
Reply With Quote
  #6 (permalink)  
Old 03-20-2010, 09:30 PM
chatcher's Avatar
Senior Member
 
Join Date: Apr 2005
Location: butler, pa
Posts: 1,130
Default

very nice
__________________
03 51
00 51 trackbike
Reply With Quote
  #7 (permalink)  
Old 03-26-2010, 11:05 PM
RVT2002's Avatar
Senior Member
 
Join Date: Aug 2005
Location: Gurnee IL,
Posts: 181
Default

I always like that design rather than the rc51 look alike
__________________
06 CBR1K
06 Giggy6(Track bike)
02 RC51
93 NSR250 se
91 TZR250R
92 RGV250
96 RGV250(VJ23)
Reply With Quote
Sponsored Links
Advertisement
 
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT. The time now is 08:45 PM.



Powered by vBulletin® Copyright ©2000 - 2012, vBulletin Solutions, Inc.
© 2011, Speedzilla.com, Inc

Search Engine Friendly URLs by vBSEO 3.3.2