Location: Where I >Try to LIVE< Always within the Moment of Thanksgiving to Christ Jesus, My Lord Saviour!
Posts: 5,287
STILL Waiting for a Quote bro.,.......? READ Below.
As I am running with a Thorsten Air Box, I'm guessing you get the joke of me calling my gas tank and airbox cover...? Joking aside but that is Exactly what it is.
Depending upon what you quote me for this... I'll send PP right away eh.
Peace Jeff
Quote:
Originally Posted by RVTMAVERICK
Hey Mark,
I'll Definitely take the QR set for My Seat.
AIRBOX COVER:
Mark, I'd like to know, what's My Costs, just for the "Hold Down Clips & Laynard" for my Air Box Cover?>>>> Be good to me brother...
Because: the QR-Pinsfor My AirBox Cover (Fuel Cell\Gas Tank) I'll make my own.
Peace Jeff
__________________
IF You are Not a Member of and You do NOT Support the NRA, then as (uncle Ted) says: "You are NO friend of mine!" Please Also support Your Local State Shooting Org. as well! I support the VSSA and the VCDL too.
USA: OUR 2nd Amendment Right "We HAVE the Right to Keep andBear Arms"
OK, looks like $30 per set + $2 for shipping or $60 for both shipped
I am ready to take orders now and they will be done this week
Here is the list so far i think. If you want in or off please speak up i would like to get these ordered and on the move ASAP
LouW-Both+a QR gas tank pin-PAID Meisch-Seat Defender-Seat TLRskunk-Seat-CBR-PAID Jeff-Seat Fiddy1-Seat Dave-Both Christopher-Seat Kev-2 Seats
OK, i also am working on the front Scotts option and this is what i have so far please let me know what you think. After Jeff's help i am wondering if i use SS and drill the hole at the 34mm mark as well as maybe one shorter and one a wee longer and you will have to push down on the tank and slide in the pin? I am not sure if the scotts raises the tank or the thorsten but three holes should halp make it suit most with the scotts?
Also, lanyards.
Do we want tanks and seats? I was wondering if we do one long for the seat and same for fronts or two for each?
here is the paypal addy too for those ready to get er done. I will mark it down as paid as they come
OK, i also am working on the front Scotts option and this is what i have so far please let me know what you think. After Jeff's help i am wondering if i use SS and drill the hole at the 34mm mark as well as maybe one shorter and one a wee longer and you will have to push down on the tank and slide in the pin? I am not sure if the scotts raises the tank or the thorsten but three holes should halp make it suit most with the scotts?
Also, lanyards.
Do we want tanks and seats? I was wondering if we do one long for the seat and same for fronts or two for each?
here is the paypal addy too for those ready to get er done. I will mark it down as paid as they come
1 hole, is all's you need per "Hold Down Headless bolt", this ones Easy I'll give you a shout later today or you can call me later....
About the Laynard(s), all's I was thinking was, the "Hold Down Clips" be tired<>to one another... that's all... (this ofcourse is just my 2cents)
Peace Jeff
__________________
IF You are Not a Member of and You do NOT Support the NRA, then as (uncle Ted) says: "You are NO friend of mine!" Please Also support Your Local State Shooting Org. as well! I support the VSSA and the VCDL too.
USA: OUR 2nd Amendment Right "We HAVE the Right to Keep andBear Arms"
Location: Where I >Try to LIVE< Always within the Moment of Thanksgiving to Christ Jesus, My Lord Saviour!
Posts: 5,287
Quote:
Originally Posted by TLRSKUNK
This might be fine on theFront but the on the Seat Pins i think having the Clips tied together would suck.
I wanted to make sure you knew what I was talking about Jeff.
Peace Lee
LMAO..... Thanks LEE..... Good to know.....
__________________
IF You are Not a Member of and You do NOT Support the NRA, then as (uncle Ted) says: "You are NO friend of mine!" Please Also support Your Local State Shooting Org. as well! I support the VSSA and the VCDL too.
USA: OUR 2nd Amendment Right "We HAVE the Right to Keep andBear Arms"
OK, looks like $30 per set + $2 for shipping or $60 for both shipped
I am ready to take orders now and they will be done this week
Here is the list so far i think. If you want in or off please speak up i would like to get these ordered and on the move ASAP
LouW-Both+a QR gas tank pin-PAID Meisch-Seat-Paid Defender-Seat TLRskunk-Seat-CBR-PAID Jeff-Seat Fiddy1-Seat Dave-Both Christopher-2Seats-Paid Kev-2 Seats-PAID
OK, i also am working on the front Scotts option and this is what i have so far please let me know what you think. After Jeff's help i am wondering if i use SS and drill the hole at the 34mm mark as well as maybe one shorter and one a wee longer and you will have to push down on the tank and slide in the pin? I am not sure if the scotts raises the tank or the thorsten but three holes should halp make it suit most with the scotts?
Linear Mode
