FS: Various good used parts

[pdfruth]

No longer needed, since I sold the 03.
I kept alot of these as spares for the track. But, never needed em.
All electrical parts are verified/tested good.

All came off my 03 (SP2). Some may work on SP1 or SP2. I’ve noted those I “know” are SP2 only.

All prices are + shipping. Send me a PM with your zip code, for a shipping estimate.

Sold OEM clipons - $25
Sold Carbon hugger - $50
Left-side radiator fan (SP2 only) - $15
Sold Left-side radiator (SP2 only) - $50
Sold Oil cooler w/ lines (SP2 only) - $25
Sold Intuitive frame sliders, new-in-the-box (SP2 only) - $50
Sold Sprocket carrier + axle spacers - $20
Sold Stator cover (left-side crank case cover) - $20
Sold OEM gas cap w/ key - $10
Right-side lower fork tube - $25
Steering head bearings + hardware - $25
Sold Nicky mod’d sprocket cover - $20
Various fork bits - Make offers

Sold Baro/MAP Sensor - $45
Sold Power Commander PC IIIr (SP2 only) - $125
ECM (SP2 only) - $125
Ignition converter - $75
Regulator/rectifier - $50
Ignition Pulse Generator - $25

See below for pictures & further details.

Preferred method of payment is cash, check, or postal money order.

Pat

[pdfruth]

OEM clipons
Honda part numbers
(left) 53150-MCF-000
(right) 53100-MCF-000

[pdfruth]

Carbon hugger
I don't recall the maker

[pdfruth]

Left-side radiator fan (SP2 only)
Edit: includes the original/OEM mounting screws, not pictured

[pdfruth]

Left-side Radiator
Does NOT leak.
As you'll notice in the picture, there is a small area of rash (caused by dropping the bike in the gravel/run-off, at the track). And a small dent in the forward tank. Otherwise straight. I replaced it cuz I'm anal.
Everything pictured is included.

[pdfruth]

Oil cooler w/ lines.
Does NOT leak. But, does have a slight bend.

[pdfruth]

Intuitive frame sliders. New-in-the-box.
$99 new from Intuitive Race Products.
See -> EFS-41 Ebony Frame Slider - RC 51 ('02-'04) at Intuitive Race Products Online Store

[pdfruth]

Sprocket Carrier (aka cush drive) w/ Axel spacersGreat to have for quick gearing changes at the track.
Note: rubber dampers not included.

[pdfruth]

Stator cover (aka, left-side engine case cover)
no rash, scratches, or cracks.

[pdfruth]

OEM gas cap w/ key
someone powder-coated the ring. There are a few nicks in the powder coating.

[pdfruth]

Righ-side lower fork tube (aka slider).
All mounting tabs in-tact.
Perfectly straight. No nicks, dings, or scratches.

[pdfruth]

Complete set of steering head bearings.
Includes all steering head nuts & washers.
One of the dust seals is missing.

[pdfruth]

Nickey mod'd front sprocket cover.

[pdfruth]

Baro / MAP sensor.
Same part is used for both sensors.
Honda part # 37830-MCF-003

[pdfruth]

Power Commander PC IIIr.
Worked flawlessly, right up until I removed it from the bike (in March), and for the three years I used it.

[pdfruth]

ECM
SP2 only
Honda part # 38770-MCF-A21

[pdfruth]

Ignition converter (aka. CDI)
Honda part # 30450-MCF-003

[pdfruth]

Regulator/rectifier
Connectors & wires all in excellent condition
Honda part # 31600-MCF-D30

[pdfruth]

Ignition Pulse Generator (IPG), aka crank sensor

[earlySP-1]

PM sent on ft sprocket cover.