Taillight wiring
1999 996s - the bike came with the stock rear tail light assembly and one of those evoluzione wiring kits that utilizes the tail lights as turn signals.
I bought an LED setup that has the turn signals integrated along with extra wires coming out the back just for the signals. So after a little research I realized I needed to remove the evoluzione assembly and plug back into the factory wiring harness. I did that and the brake/tail lights are working fine. The turn signals, however, are still acting a little funny. There appears to be 4 wires I could possibly plug the turn signals into - one set is labeled SX and the other DX. Does anyone know which is which? I've tried as many combination's as I could think of and none of them seem to be working properly. FYI - There are no front signals currently plugged in which I'm assuming would take up the remaining 2 plug (either DX of SX).
|
Linear Mode
