98 904 monster flywheel(need)

#1 (**permalink**) 03-23-2005, 11:04 PM

need a stock 3 phase flywheel asap help track day 4-11 4-12

Modified by wmfleet2 at 6:11 PM 3/24/2005

#2 (**permalink**) 03-24-2005, 01:36 AM

any three phase flywheel should fit just fine. the weights may vary a little, that's all.

altho some of the very early ones had a boss on the inside where the bearing sleeve goes. so the bearing sleeve was different from memory.

#3 (**permalink**) 03-24-2005, 02:21 PM

Give Bruce over a bcm a called or email. He might have one laying around since they cut them down a lot. Of course then you might have to get on of the lightened ones.

Link to his info

#4 (**permalink**) 03-25-2005, 12:27 AM

thanks,bought a nichols alu. one today
mike