Can the Paul Smart go Bi?

[900SS/FE]

Biposto that is?

Can you take the parts from the newer Sports and make the Paul Smart a two seater, or is there different framework I need to be aware of?

Thanks in advance for the help!

Cliff

[mooner]

Yes, it been done. Go over to Ducati.ms and do a search.

[900SS/FE]

Thanks for the response. I found that shortly after posting here.

[motoxxx79]

i made my sport a bip setup..... i fabed up some mounts and used rear foot pegs from an 800ss...i have yet to ride anyone yet tho.... i'll try to post some pics this weekend

[900SS/FE]

Thanks Moto, it would be cool to see another person's solution. The others I've seen didn't quite work for me asthetically.

[motoxxx79]

ok, heres what i did..... I removed the stock bolts going through the top of the shock and supporting the exhasut and replaced them with some stainless hardware from ACE (grade 8, and a Flat head...) I then drilled and tapped into them so they would accept an M6x25 bolt. I then used some clamps that i had to clamp to the frame and ran a longer bolt from the rear mounting hole of the passanger rearset through the clamp, using a piece of pipe as a spacer. I used stainless hardware (but not pipe...doh!) and made sure to use Nyloc nuts so nothing would rattle loose. So far, i have about 2k miles, and no problem on this setup and i DON'T take it easy on my bike! Let me know what you think.

[900SS/FE]

Definately the best solution I've seen someone put together so far. Thanks for taking the time to post these up!