2005 749r

jrockcolors · #1 (**permalink**) 10-06-2009, 03:30 AM

I dont no if this is the rite thing to do or not. I think i want a new 1198s to race next year. so here it goes..
2005 Ducati 749R
Ducati Corsa Billet Clutch Piston
Ducati Corsa Electronic Gearchange
Ducati Corsa Ergal Belt Rollers
Ducati Corsa Ergal SPKT 40T 520
Ducati Corsa Ergal SPKT 41T 520
Ducati Corsa Fairing Stay & Wire Harness
Ducati Corsa Fuel Filler Cap
Ducati Corsa LTWT SPKT 14T 520
Ducati Corsa LTWT SPKT 15T 520
Ducati Corsa Magnesium Clutch Side Casing
Ducati Corsa Magnesium head cover kit, rear - alt. side
Ducati Corsa Magnesium head inner cover kit - timing side
Ducati Corsa Light Alloy Clutch
Ducati Corse Racing Kit
GP Suspension
Leo Vince 57mm Exhaust FAC
Power Commander III
RK GOLD 520 Chain
Section 8 Superbike 3 GAL fuel tank
SharkSkinz
SpeedyMoto Anodized Clutch Springs
SpeedyMoto Clutch Cover
SpeedyMoto Water Pump Cover
Swing Arm Sliders
Throttle cam system
Titanium hndlbr rsv cvs
Zero Gravity Windscreen
Spare wheels with rotor's
Speedy moto adjustable clip on's
brembo remote master cyclinder
848 Donnie unger built motor from Ducpond motorsport's

I have all the stock bodywork and the R tank.wiring loom etc.the bike comes with a ton of spare's gauge pack ,clip on's, radaitor , vortex faring stay.
Asking 13,500 for the whole set up. You can email me at jrockcolors@yahoo.com

jrockcolors · #2 (**permalink**) 10-06-2009, 03:33 AM

More Pics

jrockcolors · #3 (**permalink**) 10-06-2009, 03:37 AM

Few More

speedracerrc51 · #4 (**permalink**) 10-06-2009, 02:47 PM

part it ou i will take some of the parts....

rotty900ss · #5 (**permalink**) 10-06-2009, 03:03 PM

Same here. I'd be interested in some parts....

**Commoto** · #6 (**permalink**) 10-06-2009, 04:26 PM

Where are you located ? Are you interested in a trade?

jrockcolors · #7 (**permalink**) 10-06-2009, 10:02 PM

Quote:

Originally Posted by Commoto

Where are you located ? Are you interested in a trade?

Im in Balitmore, What would the trade be?

jrockcolors · #8 (**permalink**) 10-11-2009, 10:49 PM

To The Top

jrockcolors · #9 (**permalink**) 10-14-2009, 03:37 AM

back to the top

jrockcolors · #10 (**permalink**) 10-30-2009, 10:07 PM

jrockcolors · #11 (**permalink**) 11-18-2009, 03:50 AM

Pm returned

sideways · #12 (**permalink**) 11-18-2009, 06:11 PM

Hey, what is a Section8 3 gallon tank? I worked there years ago and I don't even remember.

jrockcolors · #13 (**permalink**) 11-19-2009, 11:52 AM

Quote:

Originally Posted by sideways

Hey, what is a Section8 3 gallon tank? I worked there years ago and I don't even remember.

Its a tank we got in 05 from section8 that holds three gallons.I dont know what more to say.

jrockcolors · #14 (**permalink**) 11-26-2009, 10:58 PM

Sale pending

sideways · #15 (**permalink**) 12-01-2009, 05:17 PM

Quote:

Originally Posted by jrockcolors

Its a tank we got in 05 from section8 that holds three gallons.I dont know what more to say.

I can't read tone in a message so I am just going assume that my question was way too general in nature and you are not just being difficult.

Do you know in what way was it modified to only hold 3 gallons?
Was it cut and rewelded?

ANY idea at all?

jrockcolors · #16 (**permalink**) 12-05-2009, 10:37 PM

Quote:

Originally Posted by sideways

I can't read tone in a message so I am just going assume that my question was way too general in nature and you are not just being difficult.

Do you know in what way was it modified to only hold 3 gallons?
Was it cut and rewelded?

ANY idea at all?

I wasent being difficult, i just really dont no. It was on the bike when i picked it up. But bye looking at it it looks to have been cut done and welded up.

Bike is SOLD..... please delete thread