Year End Inventory - Need More Space!

#1 (**permalink**) 12-22-2004, 07:21 PM

Sheez, there's more s@#@$ here than you can whatever...too much to list and not enough room to add more. Lots of used parts including take off stock pipes, bodywork, huggers, dented/scratched tanks etc etc. If there's something you need for your older Ducati, lets say 1998 and older, shoot an email and ask if we have it. Used parts are normally 50% or more off new price.

#2 (**permalink**) 12-23-2004, 06:22 AM

Do you have any '93 888 parts? Gauges, tank, etc...

#3 (**permalink**) 12-23-2004, 05:10 PM

any huggers that will fit the SSS? I think the 998 arm is like those before it (I could be wrong). Prefer CF but not required. Pretty flush on everthing else though.. I think.

#4 (**permalink**) 12-24-2004, 12:09 PM

Used 916 SPS cams?

#5 (**permalink**) 12-25-2004, 12:53 AM

Any mid 90s 900ss or 750ss reatsets?

#6 (**permalink**) 12-25-2004, 02:06 AM

Don't want to hijack the thread, but, I have a set of rear sets from a 95 900 SS SP, used. E-mail to Bobmika@aol.com

#7 (**permalink**) 12-25-2004, 02:27 AM

Sent you an e-mail duc1036

#8 (**permalink**) 12-25-2004, 10:15 PM

I am looking for a racing fairing stay for a 916/748.......

Also a racing upper and lower for the same era bike. Dont care about color since Im gonna paint it. LP Privateer wants $75 each for the fairings and $100 for the stay.

Long shot but can ya beat it???

Rhoades

#9 (**permalink**) 12-26-2004, 04:20 AM

Do you have a wiring harness for a 1996 900ss/cr

#10 (**permalink**) 01-05-2005, 06:04 AM

any chance of Kevlar brake/clutch lines or radial master brake/clutch cylinders?

#11 (**permalink**) 01-05-2005, 02:06 PM

Sorry, no. These "safety" type items are not the best things to stock and sell "used" as they are most likely not in optimal condition. We do not recommend Kevlar lines anyway and don't stock them.

#12 (**permalink**) 01-06-2005, 03:26 AM

ducdoger,
FWIW - I think Feracci has some Tubo kevlar lines on ebay.

#13 (**permalink**) 01-06-2005, 12:13 PM

So whats up BCM....I e-mailed you guys the day (or day after) this was posted originally and never got a response.

That sure gives me a warm fuzzy.

#14 (**permalink**) 01-06-2005, 12:33 PM

Looking for a CF front fender for a 97 900ss....got one?

#15 (**permalink**) 01-06-2005, 01:44 PM

FYI, CF stuff is not in the used bodywork available. Stock takeoffs, now that's the ticket!

#16 (**permalink**) 01-06-2005, 02:11 PM

Any stock 5-spoke take-off rear wheels for a 916-996-998/single-sided swingarm?

#17 (**permalink**) 01-06-2005, 05:49 PM

Any take-off OEM Marchesini 5-spokes for a 17mm rear/25mm front '99 SS?

#18 (**permalink**) 01-06-2005, 06:55 PM

Hi, Nick. Sorry, no. If tax season is good to you, why not just go for new ones?

#19 (**permalink**) 01-06-2005, 07:26 PM

Thanks BCM for getting back with me.

For everyone else, they have been closed for the Holidays (since I sent my e-mail on 12/23).

#20 (**permalink**) 01-06-2005, 10:32 PM

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by bcmducati »</TD></TR><TR><TD CLASS="quote">Hi, Nick. Sorry, no. If tax season is good to you, why not just go for new ones?</TD></TR></TABLE>

Tax season is ALWAYS good, its getting through it that's bad. Mmmm...shiny new Marchesinis...sounds good, but I am a practical sort and would rather put that money towards a shiny new, red-framed Multistrada 1000...