Quote:
|
Originally Posted by MAGNUMDUC
Easy-outs work well if you have patience. Gooooo Slooooow with the drill, or you will snap the easy-out off in the bolt. Believe me it is not fun to drill out an easyout bit(they are very hard). If you have to destroy the head of the bolt, I found tungsten carbide bit in the dremel works great. Good luck, and please post how you got it out.
|
I would have to say that the eazy out won't work if the allen key didn't. You have to break down the thread lock or binding first. Heat of about 450 f will do it but you must put it to the bolt not the brake caliper where it could damage the rubber parts. Another trick is to tae a punch that fits into the allen socket and tap the fastener sharply. Drilling off the head is a potential solution. If you jam an EZ Out into the socket head, you won't be able to drill it!