For those that have PMed me and are interested.
both of these are set up to use Med size Rizoma res with horizontal fittings part # CT025B (B=Black). There are 2 versions of this part # you need the one with the rubber gromets, cause the gromets fit into the bracket.
You need a Banjo bold bleeder on the clutch side.
You need to bleed the masters (Clutch and Brake)also.
Need to have some kind of Vacum type bleeder like the Mity Vac or you will not get all the air out. I have had these res on the 998 for about 2 years and not a single problem. Id be willing to make some more but only plain aluminum and can tell you how to polish them up or you can paint them.
The 998 bracket only bolts up to the cyclecat top clamp if its already predriled and tapped like most are. The reason for the thin V piece that connects the 2 sides is so when you unscrew the res it dont move and it is hidden under the tripleclamp.
The monster one shown, I made to bolt up to the 2 screws that hold the guages down in the front.
As you can see from the pictures one they are mounted on the bike and all done you can barley see the brackets at all.
These are cut on a CnC router and the 998 ones are hand bent by me.
998 ones are made out od .080 aluminum and the Monster ones are .090.