Quote:
Originally Posted by darcati
Thanks Ben710, your assistance is much appreciated, I should have most of it worked out but am not 100% sure with the rear ride height. Many have stated a figure around 235-253mm (DOS state 253mm). My question is, is this figure measured from the top of the sprocket carrier nut or from the centre of the axle? I too am running 14T and 38T sprockets with a 96 link chain. I will be setting the forks with just the red tops showing as a starting point.
|
253mm rear ride height is reference for the DoS ride height tool...vertically, from the top edge of the tool to the center of the axle... I'll try to snap a pic for you
One note: the chassis tools can vary in design, i.e. Ducati, DoS, Motowheels may all be slightly different from each other. 253mm on a Ducati tool, may be 10+mm different from the DoS tool.