Mold Making
Or you can make your own tail a slice at a time with plywood until you have the right shape, even cut and sand it. when its right, cover with a thin layer of bondo and sand smooth. Now you have the master. Wax well and make a fiberglass mold with a seam down the middle for rt and lf molds. Let dry, remove one at a time. smooth and polish and bolt rt and lf back together. Layup fiberglass inside and wait to dry. Unbolt and smooth, paint and install.
Or buy it already done. or adapt the tail from your favorite model with new subframe.
Larry
VFRrider
|