Speedzilla Motorcycle Message Forums - View Single Post - 996 front end on a DS
View Single Post
  #6 (permalink)  
Old 08-11-2009, 09:18 PM
webman's Avatar
webman webman is online now
Senior Member
 
Join Date: Oct 2005
Location: Jacksonville FL
Posts: 383
Default

Its not a question of making the stock units work better. I've already got the Ohlins R&Ts with the Mag triples. They look so much beefier and the biz compared to the stock units. These are 27mm offsets and look to be the same off set as the DS measured from the center of the fork tube back to the center of the steering tube nut. Are the steering tubes the same as far as the diameter,top and bottom.Top eight hole nut looks the same. The DS tube looks to be shorter but if the same I could just swap tubes for a bolt on? The fork lenghs are the same. This is the bike I just got and am considering it for.


2007 ducati 1000 ss race superbike 6500.00 - 13x Forums
Reply With Quote