Quote:
Originally Posted by FunkZ
So what all was done, just the heads and a remap?
Benno I am also trying to figure out what frame that is. Obviously it's the 9x6-style bodywork but what has the bolt-on solo rear with the 900ss tank?
|
It had a balanced crank/flywheel with 900cc je pistons . Benno set his own squish and cam timing . I made the heads using the flow bench and modified but stock size valves . Then it was mapped with a pc3
__________________
life is work
For Ducati engine blueprinting/crank balancing/performance cylinderhead prep/ porting / big valve conversions-
www.cjsracing.co.uk
For 1st class dyno-tuning ,mapping, custom eproms- and a whole load of other cool stuff
www.hypertrick.net
www.bikeboy.org