Speedzilla Motorcycle Message Forums - View Single Post - Sp1 clutch fiber disk vs sp2
Thread: Sp1 clutch fiber disk vs sp2
View Single Post
  #2 (permalink)  
Old 06-09-2009, 01:21 PM
DesperateSP2's Avatar
DesperateSP2 DesperateSP2 is online now
Senior Member
  
Join Date: Aug 2008
Location: The Alps... the original ones!
Posts: 1,806
Default
To completely overhaul the clutch you'll need the following parts:

7 (seven) friction plates, Honda code 22321-MAT-000, Barnett code 301-45-10008 on an SP2, one less plate on an SP1
6 (six) metal plates, Honda code 22201-MAT-000, Barnett code 401-35-078027
6 (six) springs, Honda code 22401-MCF-000 OR 1 (one) Barnett spring kit MT-96-6

You may also need a clutch cover gasket (quite pricey at around 17 €), Honda code 11356-MCF-000.

I got a great deal on a full Barnett kit on ebay from a Scottish dealer, PM if you are interested.

Friction plates are the same as used (from memory) on the Goldwing 1800, Blackbird, VTX1800 cruiser and CB1300 retro. These particular metal plates are used only on the SP, Blackbird and CB1300.
Last edited by DesperateSP2; 06-09-2009 at 01:22 PM. Reason: Typing error...
Reply With Quote