Quote:
Originally Posted by AVR89
I think I'm missing how this works. It's just a stud? So how would I connect somethiing to it?
Overflow bottle to snorkel for example...
|
It's basically a bolt with a flat head that is encased in fiberglass or resin, it will come with a nylon or stainless steel nut. Your over flow bottle will need to have a mounting hole in it and you would then put the bolt/stud through the mounting hole and secure it with the supplied nut. Because you are mounting to carbon you will want to use the fiberglass stainless stud to prevent dissimilar metal contact and reduce the chances of getting any corrosion.
picture of the stud to get a better idea of how it works
I also found this while looking at another supply shop. It's a stand off mount with a 360 degree swivel on the end that you would use with a tie wrap. So you could go with one of these and put a tie wrap around the neck of your overflow bottle.
This place has more pictures and mounting options for all composites.
frame set