[redtop]

Hi folks!

Finally I have installed the Keihin FCR 41s in my Bimota DB2. The carbs has a TPS and since I already have an Ignitech TCIP4 programmable ignition unit installed, I thought I hook up the TPS to the TCIP4 and run a complete ignition map instead of just an ignition curve.

Now, has anyone done this already and can share som experience?

My engine setup is 944cm3 with HC pistons. Stock heads and stock cams dialed to 107°. Squish is pretty tight, about 0,85mm. Stock inlet manifolds and Keihin FCR41 carbs. Exhaust is the DB2 original open exhaust.