Quote:
Originally Posted by wibbly
i'm pretty sure the sp2 stem is much beefier than the sp1... which would mean the steering head accepts different bearings on different races... i can't see a wide sp2 stem fitting into a narrow sp1 head
|
buy a set of sp2 bearings and a top triple and stem and stick it in your sp1 headstock
the stem does not fit snug in the headstock the bearing fit snug is all and the bearings should just fit right in.
i think you will find the 01- and the 02+ have the same OD body stem and the difference is the threads on top where it goes through the triple and the top bridge nut. the bottem bearings look the same and i think you can use either year bearings for the top too