Quote:
Originally Posted by 20_RC51_00
Here is a list of materials you will need starting form the mold and working upward.
mold>carbon/reinforecment>release/peel ply>perf. film>bleeder and breathers positioned depending on how much excess resin you are trying to get rid of
|
I'm not sure what the perf film is in that list, I just use peel ply and then the breather layer (usually 2).
My epoxy is 60 min pot life
The last set I did last night I made sure there was enough excess bag, and whala, they all turned out great
Now I just need to figure out how to finish them. I guess scuff with 220 and then a good 2 k clear/buff ?
Once I get the stretchelon film in, I'll give some of the other parts a go. These were 999 heel guards, and monster headlight support brackets.
I've been using 100% carbon in my layups, no FG to speak of.