All the wings/parts I've made before have had a smooth finish with miniman resin but without the weave exposed. Then it's just a slight scuff with scotchbrite and hit it with some 2k clear. Buff/done.
I'd have to put 10 gabillion coats of clear on the pieces with exposed weave.
Thought I just had.
I'm using the ASC vac bag tube. I'm wondering if possibly the bag isn't stretching down enough to press on the part, hence the bubbles. I've ordered some of the stretchelon stuff that is supposed to be 400% more "stretchy" than the tubes I've been using.
I have to wait a week before it shows up to see if it's going to help.
__________________
|