View Single Post
  #3 (permalink)  
Old 05-22-2008, 01:56 PM
Desmo Demon Desmo Demon is offline
Duc and Cover
 
Join Date: Nov 2003
Location: Easley, SC
Posts: 46
Send a message via AIM to Desmo Demon
Default

Quote:
Originally Posted by sideways View Post
Does anyone know the proper pump for this set-up. I believe it is a 4-5 psi. Does anyone have a part number that I could use at NAPA or something???? Thanks, Matt
Ditch the fuel pump entirely. I have the same setup and the float bowls are lower than the bottom of the tank, so gravity feed is enough. I haven't run across any fuel starvation at higher rpms.

I also use a simple line routing and use the return line on the tank to act more like a vent to the tank. Here's my line route...

http://www.desmodemon.com/new_fuel_route.jpg

For all the Paso info you'll probably ever need: ducatipaso.org • Index page
__________________
2002 Ducati 748 monoposto
1998 Ducati ST2
1988 Ducati Paso (project)
1987 Ducati Paso 750
1985 Harley FXEF
Reply With Quote