<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by aces anugal &raquo;</TD></TR><TR><TD CLASS="quote"> Hey, what are you doing about a tail light? I'm thinking of going the Hiperform route as well. By the way, how was installation?</TD></TR></TABLE>

Thanks guys. I'll try to get some pics posted of the tail light setup. I am using small LED strips for brake/tail, I can't recall the brand right now. They are very visible! The Hiperform installed easily, just bolts on, but I tig-welded on a few brackets to hold the fuel pump and battery. A YTX7 battery fits between the rails of the subframe nicely, can't even see it. The seat is a light ply base that I had a local upholstery shop foam and cover, it has tee nuts inside with bolts coming up from the bottom thru the subframe into the seat, which sandwhiches the tail section to the subframe. Biggest thing was creating a wire harness, it is very minimal with just the basic functions. Enough to keep me out of trouble with the law I hope.