[darnold]

I'm working on the same project as I have 18" and 16" wheels on my TT2.

I picked up this wheel set through a friend of mine in Japan. The are sized for the Montjuich and came with disk carriers to fit the disks from the Oscam wheels or you can use the brembo disks. The front is 3.50x17 and the rear is 5.00x17. You can run a 155 dunlop slick or a 150 dunlop 208 tire on the back. They are forged AZ80 magnesium and then machined. What I like is that they are made to the Campagnolo pattern but have a modern cush drive and 520 sprocket.




If you have a big block motor I think it is an easier change. If you have a small block motor like me you need to swap the swing arm and modify the counter shaft sprocket. I am working on a new swing arm in aluminum with the 28mm swing arm axle.

I have a lot of dimensions if you want to collaborate.

-dan