Here is the link I used when I did my ss.
http://home.earthlink.net/~desmoduck...r_modpics.html
The results were nice, but removing the sleeves is a PITA, Forget about hitting it with a block of wood its not going to happen unless your very lucky. I have done 3 sets now, I find its best to use a airhammer to seperate the sleeve from the pipe going at and downward angle were the sleeve sits on the pipe. Use the airhammer on the pipe if that makes sense
I only buggered up 1 out of six pipes doing it this way. Could not tell once it was reassembled nor did it leaked...
Good luck