Speedzilla Motorcycle Message Forums - View Single Post - Hotbodies fitment question
View Single Post
  #6 (permalink)  
Old 11-23-2006, 10:37 PM
KRG's Avatar
KRG KRG is offline
Member
 
Join Date: Sep 2005
Location: Calgary, Alberta
Posts: 99
Default

Quote:
Originally Posted by departmentofsuspension
Thye had bodywork available in 2004. So they have 03-04 bodywork.



It's better than being the other way arround. Put some spacers between your mirror mounts and the bodywork to mimic the width of the 05-06 mirror mounts. It's the people that are trying to go the other way (putting 03-04 stuff on 05-06 mirror mounts) that are screwed. They won't be able to spread the bodywork out enough to clear the wider mounts so the bodywork will noot go all the way on and the windshield will not reach to the sides near the rear mounting holes.



No, but you are one in a hunderd. If you get the DP fairing stay with the DP harness the switch between the headlight bucket and the fairing stay takes no longer than 5 minutes.
Very good points that I hadn't considered and if its that quick to swap out the headlight bucket then its a non-issue as far as I'm concerned and I'll forge ahead.

Thanks very much and I got your PM.

Cheers

Kelly
__________________
CMRA #36
2004 Ducati 749 Dark
Renfrew Chrysler
Sport Cycle
Reply With Quote