Taken from Brad Black, and moto one. 200lbs.

Just setting the sag for my weight (90kg) and a twiddle of the damping knobs. Where I ended up is shown below. These settings seemed to settle the bike down a bit, and take a touch off the harshness.

Front: Rebound 10 clicks out
Compression 11 clicks out
Preload wound full in

Rear: Rebound 15 clicks out
Compression 10 clicks out
Preload unchanged

I went with 3 lines showing on the fork tube vs the standard 4 lines, and took a bit of rebond and compression out of the front..1 click out from standard, and fiddled with rear rebound, and compression (made them both a bit softer), leaving the spring preload standard and the ride height. Worked better than stock, but you have 25 pound on me.

Lou