The map is very nice. No flat spots or and other badness! As far as peak numbers, 79ish hp @ 8000 RPM, and 57ish ftlbs @ 6000 RPM at the rear wheel. Those numbers would probably be higher or lower depending on the dyno you used... There were bigger gains than what showed in peak power through out the range, and driveability / throttle response improved a lot. Peak numbers do not reflect the improvement realized by having a custom map done.

As far as the PC3 thing goes, true enough on the model years fitting your bike, but what I had to do was send my unit back to Dynojet to get it re-flashed with the firmware for the 00 and up bikes. The unit I bought on sale was for a 99, and it did not work. Dynojet knew of the problem and flashed it for free.