You can use the 9*6 premufflers for your "itty bitty" mufflers, but don't expect much noise reduction. The bearings are inside the cases, so there isn't much to show, & the swingarm bearings are complete in their stock position. The only conversion I have here is my black monster, & it's complete, so I can't show you any step by step pics. All you need to get started is the measurement of the inside of the swingarm so you can cut the cases. If you don't have one already, buy a 9*6 swingarm off Ebay. You'll need the complete unit including shock & linkage, price should be aroung $350. If you just want a bare swingarm, I've got a couple here that you can have for $100 (per), I use the guts for the SSS tubular units that I make & always have leftover stockers.