Quote:
|
Originally Posted by mouser830
I changed my oil and mfilter and added the 3.9L stated for a 99 900ss. The level is well above the max on the site glass. I drained the oil completly?
Anybody have this experience
\
Scott
|
Are you warming the engine up before you change the oil? I was always told to warm the oil up a bit before changing it, that way the oil is a bit thinner and flows a bit better out of the motor. Take it out for a five or ten minute ride, let it cool for fifteen minutes or so to where it won't burn you, then do the oil change.
Another thing a buddy showed me was that when you think all the oil is out of the engine, take it off the rear stand, get on it, and rock it left and right. You'll be surprised at how much more oil actually comes out of the motor. I was told it was the design of the engine cases that pools some of the oil on one side when you change the oil. Rocking it gets this pooled oil out of the cases. I've never seen the inside of my cases, so I don't know if this is what is truly going on, or if the rocking frees up oil that is in the cooler or whatnot, but it sure as hell works.
Hope this helps.