Quote:
|
Originally Posted by marvin
What's the clearance on the rod bearings? If they are tighter than 1 1/2 thou. I would take it easy for a few hundred miles. If 1 1/2 or more don't worry about it.
|
Thanks Marvin. I'll check my notes. I think they are just on the looser side, my crank journal was just within spec. for std half shells.
NC, the fairing on the wall is from my old 748. I've been toying with fitting it to the SS [If I hammer the SS bodywork again...it has already gained a few lbs. in glass and resin
]