Had the same problem with Jasons numbers. The cause was his numbers are too high. The ecentric was in the right position. There might be variations in the subframes so his numbers might be right for some, but mine was way too high with my alum subframe. His numbers might be right for the longer mag swingarm too, that would get the tire off the belly pan. I know some bellly pans are made for the longer arm as well. I went with the ride height tool from European Cycle Specialties and made the adjustament correctly. I know alot of people think highly of Jason on this board but he gave me some stupid advice once. I was trying to get a adjustable fuel regulator from him, he told me to save my money and just put the stock one in a vise, squezz it a little and it will flow more fuel. To say the least I went with the correct one.